The Berkey™ MP Solar Charger
Assembly Instructions
Solar Charger: 1 piece
Connecting wire: 1 piece
Multi-purpose adaptor: 1 piece
Mobile phone adaptor (Motorola V series): 1 piece
User’s manual: 1 piece
FEATURES:
* Environmental friendly.
* Free electricity from the sunlight
* Book size, can be easily placed in brief case, hand bag, even in pocket
* Outlet jacks of different voltage: The Berkey MP Solar™ charger can charge a wide range of applications, such as mobile phones, disc (cassette) players, digital cameras, PDA’s, radios, shavers etc.
* Built-in battery cabin allows for the charging of 6 AAA NMH (Nickel Metal Hydride) re-chargeable batteries. This provides a convenient source of auxiliary backup power for application when sunlight is not available.
INSTRUCTIONS:
Unfold the solar charger and place it in a sunny location facing directly at the sun.
When the plug is inserted into the outlet jack, charging process then begins, charging process can be seen from the charging indicator. When connecting wire is disconnected, the solar charger stops charging the application and begins charging the rechargable batteries. No ON/OFF switch is needed.
BATTERY CABIN:
1. Install rechargeable batteries: use a screwdriver to release the cover, and insert the 6 AAA rechargeable batteries into the built-in battery cabin and replace the cover.
2. When disconnected from applications, the solar charger can automatically charges its own internal rechargeable batteries. Simply leave the solar charger under direct sunlight until the "battery full" indicator turns on.
3. 7.2V outlet jack is designed to take power from the rechargeable batteries. Simply plug your application into this jack, you will then have an instant backup power source.
POWER APPLICATIONS:
1. Choose the suitable voltage according to your application. The solar output voltage can be interchanged between 6V and 12V by shifting the voltage switch. 6V output is to power those applications wherein the voltage required is equal to or below 6V. The 12V output is to power those applications wherein the voltage required is between 6V and 12V.
2. Plug connecting wire into the Berkey MP Solar™ charger.
3. Plug the multi-purpose adapter into the connecting wire.
4. Plug the multi-purpose adapter into the Berkey Light™ Base or other application.
CHARGING MOBILE PHONES:
1. Choose the suitable voltage required by you mobile phone.
2. Plug connecting wire into the Berkey MP Solar™ charger.
3. Plug the multi-purpose mobile phone adapter into the connecting wire.
4. Connect phone adapter to your mobile phone
CAUTION:
The Berkey MP Solar™ charger is designed to charge one application at a time.
The Berkey MP Solar™ charger is not waterproof. Do not utilize in wet or rainy conditions.
Click here for Berkey Brochures.
Do you still
find yourself concerned about the presence of virus. Unless
you are using this device in the wild you are less to encounter a virus in the municipal drinking water supply because
of the extent of chemicals and treatment of such water. Even
in nature the presence of virus in water supplies is quite limited
because of the nature of viruses. Viruses typically need a host
in which they can survive and replicate. For your concerns,
though, the use of the Colloidal Silver Generator offered
at Nature'sAlternatives.com is highly recommended. Colloidal
Silver is nature's original antibiotic.
